Photos
Book
Collection
Videos
Virtual Tours
Pin It Share

Synchronous Converter

Circa mid-1920s


The Synchronous Converter was typically used to provide Direct Current (DC) for electrolysis in smelting, for traction motors in mine lifts and for street railway systems.

The unit pictured had an Alternating Current (AC) input of 834 amps and a DC current output of 600 volts. This particular converter was used in the 1940s at Hudson Bay Mining and Smelting in Flin Flon, Manitoba.

Manufacturer: Canadian General Electric

Model: #5185645 HCC 6 500  1200 FORM P

Specifications: 6 phase, 500 kva, 1200 rpm, 60 cycles

Notes:

  • DC was obtained chemically or by rotating a DC generator
  • AC standardization at 60 cycles in North America allowed manufacturers to construct AC transformers designed to run rotary converters with DC outputs that powered the North American Industry DC infrastructure, including DC powered LRT and trolley bus systems.
  • Synchronous converters became obsolete due to the invention of mercury arc rectifiers and solid state diodes.
  • Synchronous converters had an advantage over earlier AC/DC conversions by motor-generator sets in that their windings were on a single armature.
  • The disadvantage in using synchronous converters was that they required monitoring for start up and they also required regular maintenance.
Categories: Rectifiers Collection

Author: ephf

Edmonton Power Historical Foundation is a non-profit society dedicated to preserving the history of electric power in the City of Edmonton and the Province of Alberta, for the education and entertainment of current and future generations.

Edmonton Power Historical Foundation

Hours of operation 2023

We are located on the grounds of the Leduc West Antique Museum. Travel 5 miles west of Leduc on Highway 39. Go north on Range Road 260 (Cohne Dale Road) for about 800 metres and the museum will be on your right. The LWAS Annual Exposition on July 22 & 23 was a great success and now we look forward to the Fall Harvest on September 9 & 10, with public tours, exhibits and the Tractor Pull Provincial Finals event. The final music performance of the season will feature “Celtera” and as their name implies is steeped in the music from the Emerald Isle and Scotland. Finally, on September 15 & 16, the Lesco Pro Truck Show n' Shine arrives at Leduc West. Although our museum will only be open on the 16th, please come out and see the trucks on both days!

 

Leave us a message

 
 
Top